+62 (061) 88809911 (Hunting)
medan@victorindogroup.com
Products Brands - Viking Pump
Features: - Extended service life provided by: - Tungsten carbide components in critical wear areas of pump. - Other hardened component options available. - Silicon carbide mechanical seal faces. - Positive seal flush to keep fresh supply of liquid ...
Features: - Double mechanical seals with pressurized seal chamber and oil reservoir pressurized by ammonia, no external flush system required. - Adjustable return-to-tank pressure relief valve. - Pressure-lubricated idler bushing maximizes bushing ...
Features: - Simplified rotor retention system, economical for medium duty applications. - Jacketing suitable for hot oil or steam for enhanced application flexibility. - Belt drive or reducer drive options available.
Features: - Inert composite materials for universal chemical compatibility - Compact design - Sealless Mag Drive (CMD) - Entirely non-metallic (CMD) - High repeatability for chemical metering
Features: - Lower installation costs in remote locations when steam or hot oil is not available or long piping runs are required. - Reduced environmental costs by eliminating hot oil leaks. - Reduced energy costs with heat source in pump vs. external ...
...
Features: - Simplified rotor retention system, economical for medium duty applications. - Back pull-out seals provide access without disturbing the wet end. - Long shaft standard for pillow block and belt drive, or reducer drive.
Features: - Jacketed bracket standard on H-LL sizes for heating or cooling. Optional jacketed heads available. - Integral thrust bearing standard for heavy duty applications. - Integral pressure relief valve standard on sizes G-LL. - Motor speed operation ...
...
Features: - Drop-in replacement for existing Viking pumps. - One shaft seal (mechanical or O-ring) - Fast Clean In Place (CIP), fast Clean Out of Place (COP) - No shimming, no rotor timing, no oil/grease changing
Features: - Rugged rotor shaft support for longer life and higher pressure capabilities. - Shimless design for ease of maintenance. - Accepts industry standard cartridge seals for maximum flexibility.
Features: - Jacketing options available for all critical areas of the pump provide rapid heating for faster startup. - Allows a variety of heating or cooling media including hot oil, steam and water. - Variety of jacket connection options including ...
Features: - Back pull out seal design for ease of preventative maintenance. - Full range of flow rates available. - SAE 4 bolt ports as standard for modularity and adaptability. - Motor speed operation  = No Reducer
Features: - Series 855 offers IEC or NEMA motor mounts and ANSI or DIN flanges. - Casing and canister drains facilitate servicing. - Series 893/895/897 offer NPT / BSP or ANSI flange ports and NEMA motor mounts. - Long-coupled design available for applications ...
Features: Viking Mag Drive pumps use magnetic force passing through a statically sealed canister to drive the pump. This eliminates the need for a traditional dynamic shaft seal such as packing or mechanical seals. In turn, this eliminates the hazards ...
Features: - Motor speed operation eliminates speed reduction equipment on thinner liquids. - Patented root feed groove and advanced gear geometry for optimized high speed operation. - Space-saving mounting configurations available to better match your ...
Features: - NEMA C-face mount for easy installation and a small footprint. (75 & 475) - Simplified rotor retention system, economical for medium duty applications - IEC mount option available
Features: - Heavy duty antifriction bearing shaft support for higher pressure and extended pump life. - Motor speed operation eliminates speed reduction equipment on thinner liquids. - Pressure lubrication system automatically lubricates the idler bushing, ...
Features: - High pressure and high efficiency with thin liquids. - Pump design offers ANSI or DIN flanges, and IEC or NEMA motor mounts to conform to international standards for enhanced application flexibility. - 20 minute in-line vane replacement ...
Features: - Needle bearings provide high pressure capabilities, sleeve bearing options available. - Close-coupled motor mount or foot bracket options to match space or motor requirements. - Double pump configurations offer two flow rates operating from ...
Features: Universal 682 Series (models 4223AA/4323AA) Steel or stainless steel pumps with 4-bolt mount API 682 cartridge seals, but with exceptions to the standard. Universal Seal Series (models 4223A/4323A) Steel or stainless steel pumps with 2-bolt ...
Features: - Reduces maintenance costs and downtime associated with shaft seal failure and replacement. - Reduces environmental costs associated with shaft seal leakage. - Minimizes installation costs when upgrading existing universal series pumps ...
Features: - Accommodates virtually all sealing types and manufacturers. - Back pull-out seals provide access without disturbing the wet end. - Design adaptability for an unequaled range of liquids, temperatures, and viscosities. - Rugged design with ...
Features: API 676 Positive Displacement Pumps Rotary, 3rd Edition, Nov. 2009 is a standard put forth by the American Petroleum Institute which covers the requirements for rotary positive displacement process pumps and pump units for use in the petroleum, ...
Products Category
LATEST NEWS
30 Sep 2015
Indonesia rose four positions in the World Economic Forum's Global Competitiveness Index 2014-2015. Based on the Global ...
06 Apr 2015
Investment Coordinating Board (BKPM) investment targeting environmentally friendly (green investment as) will grow 20% in ...
28 Mar 2015
Minister of Industry (Menperin) Saleh Husin encourage synergy of various parties with actors industrial areas to develop ...
Head Office
Jl. P. Bunaken A3
Kawasan Industri Medan III (KIM 3)
Medan, North Sumatra - Indonesia
Phone. +62 (061) 88809911 (Hunting)
Fax. +62 (061) 88809996
E-mail. medan@victorindogroup.com
Information  Information
Technical Support  Technical Support